Step by Step Guide to Installing a Water Filter in Your Home

WATER FILTER | As people are becoming more and more health conscious, they are becoming aware of the hazards that can exist in their water supply. Some may live in a hard water area, some water will contain bacteria and other nasties from the process of getting it from the treatment plant to the home and treatment plants themselves, do not guarantee to be able to kill every microorganism, there is usually an acceptable government controlled level. One way of combating the problem of unclean water is to consider having a water filter fitted to your home. There are options, you could decide to treat some or all of your water. You can filter your shower head water only or you could decide to filter only your tap water or you could decide to filter all of your water. The following gives a step by step guide to installing the different water filters in your home. If you’d like to find out more about the best water filters on the market, then check out

Drinking Water Filter

You will have to decide where the faucet is going to be placed and if you can use an existing hole or whether you will have to drill one. Once you have your faucet in place, you then will connect the fiter which will be fitted under the sink. Your water supply will have to be turned off in order for the T fitting to be connected. You must then connect the hoses and then check for leaks.

Shower Head Filter

You can choose to purchase a shower head with an in built filter which saves you the brother of fitting a separate filter. This method does however limit you to the choice of shower head that you can buy, so if you like your own shower head or want a greater choice, you can choose to fit the separate filter. You need to remove your existing shower head and attach the filter, then re attach the head to the filter.

Counter Top Filter

You have to first of all remove the aerator from the end of your tap and replace it with the divertor for the installation of the best countertop water filter (you may need to use an adaptor so that the diverter will fit). Attach the hoses to the base of the counter top unit. Allow flushing for at least 10 minutes, then you are ready to go.

Whole House System

Installing a whole house water filter allows you to filter all of the water coming into your home so there is no need for separate filters. This filter is attached to the cold water inlet pipe to your home. The filter has to be fitted ahead of any water softeners. The pipe will have to be cut and the filter attached. It will normally be attached to the wall for security.

Whatever type of filter you choose, will be according to your budget, all have their advantages but if you are looking to treat all of your water then the whole house system is your choice. Remember your filter system will have to be maintained and filters changed according to the manufacturer’s instructions.

(Visited 2,424 times, 1 visits today)