How to Clean Hardwood Floors so They Shine

Clean Hardwood Floors Different-Flooring-Varieties

NEGOSENTRO.COM | The installation of a hardwood floor requires a lot of care and maintenance. This is because a clean floor has a long-lasting effect on the beauty and value of a home. If cleaned well, the floors will remain shiny and durable.

There are different hardwood floor cleaning methods. Depending on your hardwood floor finish, there are several ways to maintain a shiny floor. If your floor is made of solid hardwood finish coated with polyurethane, polyacrylic urethane or any other finish, you need to find out the best way to clean it. Here’s how to clean your hardwood floors to remove the dullness and ensure that they shine.

Sweeping, vacuuming and mopping

Any form of dirt should be removed on a daily basis by sweeping, vacuuming or using a mop. This is because dirt from sand and other particles can cause scratches wearing down your floors. Daily sweeping or vacuuming removes the dirt, leaving your floors clean without requiring the use of cleaners. Find the best vacuum floors at  https://www.squiffyclean.com/best-vacuum-for-hardwood-floors/

When cleaning, ensure that the areas experiencing a lot of movements like the doorway and places such as under furniture, rugs and cracks are also swept. Use a mop or soft piece of rug to wipe up any wet spills immediately they form. This prevents any watermarks from forming which can leave your floors looking dull.

Choose the right cleaner

When it comes to choosing a cleaner for your hardwood floors, you need to buy a cleaner that is not only effective but also one that leaves the floor clean and sparkling. To do this, you need the right multi purpose cleaner for the job to avoid damaging the floor. While there might be many cleaners said to bring out a shiny look, instead they can make your hardwood floors look worse.

When buying any cleaner, always read the label carefully and stick to the manufacturers’ guidelines. Some of these cleaners like polyurethane finishes bring about a patch or milky appearance which is quite unpleasant to look at. If you are not sure about the cleaner, test it out by rubbing it lightly after choosing a spot on your hardwood floor. The best would be in a corner. If the floor has been waxed, there will be a gray, waxy film left on the steel wool.

Cleaners containing harsh chemicals such as ammonia, undiluted vinegar, chlorine bleach have a bad effect on hardwood floors. If one of these products gives your floor a milky appearance, apply some mineral spirits using a spray application to remove the milky look of acrylic waxes and then strip and reseal your hardwood floors to bring back a shiny look.

Using vinegar and olive oil

If you decide to use any extra cleaning method after sweeping, simply mix a cup of white vinegar and 1 or 2 tbsp. of olive oil into a spray bottle, mixed with distilled water and use this mixture to wipe out the surfaces. Every once in a while, use a damp mop, at least once every week or after several weeks if your floor is not that dirty to clean your hardwood floors to remove any sticky messes.

Avoid using a soaking wet mop because hardwood floors don’t work well with water since any water that has been absorbed into the wood might cause spotting on the finish. After mopping buff your hardwood floors dry in a circular motion using a microfiber mop.

(Visited 1 times, 1 visits today)