Negosentro.com | What Should You Consider when Buying a Bluetooth Speaker? | There are many advantages of Bluetooth speakers, since with them you can listen to music with a more than acceptable quality and, in addition, it is not necessary to use any cable to establish communication with the sound source and, all this, allows you to enjoy music anywhere from devices as disparate as mobile phones or laptops.
The truth is that more and more users are considering the purchase of a model of this type, for the reasons indicated above, and with the arrival of Christmas, it is a good time to know what should not be missing in one of these devices to be sure that a quality model is purchased and, also, with maximum utility.
The first thing is to be sure of the Bluetooth version that the speaker has, since it is recommended that it be at least 2.1 + EDR (although the ideal would be 4.0 and even low-power LE). And, in addition, we must add to this A2DP compatibility that ensures smooth stereo sound. By the way, it is currently a very good idea for the speaker to be NFC compliant, especially if it is to be used with Android devices, since pairing is much faster and easier.
Other important features
The truth is that there are several sections that can be dealt with, but in this article we are going to mention the most important and that must be considered as essential. For example, the inclusion of a rechargeable battery is basic, since otherwise you do not have the possibility to use the speakers anywhere. Obviously the higher the charge of this (measured in mAh) the better, but a minimum of eight hours of autonomy is adequate. Also, it is not a bad idea to know the recharge time, since some models are excessively slow.
Although the management of reproductions is ideally done from the sound source, such as a mobile phone, the fact that the speaker has basic buttons is essential to avoid problems and, in addition, to be able to use devices other than Bluetooth (generally via 3.5mm Jack connection). That is, the power, volume, track control and also the wireless communication activation must be present for the accessory to be complete.
There are two additional issues to consider. The first is that the charging connection is as standard as possible. For example, if you have a mobile terminal with Android, the ideal is for the speaker to have a microUSB connection (if the device is from Apple, you should also check this) and, in this way, with the same charger as the phone or tablet can do the same with the speaker. The second is regarding design, and we are not referring to lines. It must be ensured that this is good to withstand outdoor use, it is certainly not easy to find a waterproof model, but it is necessary to check the protection of the buttons and the finish against possible impacts (in addition, the “speakers” must be protected by plastic or fabric on the outside.
Sound, there is a minimum required
Obviously these accessories emit sound, and it is important that what they offer complies with a minimum so that the quality is adequate and you do not have the feeling that you are facing a “box of sardines” that sounds. There are models of all kinds, with one or two internal speakers -may be of an adequate quality in both cases-, but the essential thing that all of them must always meet is the following: in terms of power, the ideal is that it be greater than 85 dB, otherwise the volume will not be good outdoors. In the frequency range section, it must be between 60 and 20,000 Hz and, finally, the impedance of 4 Ohms is sufficient.
If all this is fulfilled, and the weight is reduced, you will have Bluetooth speakers that will work wonderfully, with adequate compatibility, more than correct sound and minimal options to be used anywhere with both mobile phones and tablets. Follow the link to checkout some better option for your bike; https://theridersmarket.com/motorcycle-stereo-system/