Negosentro | The Ultimate Guide to Choose The Air Compressor Suiting Industrial Needs | A rotary screw compressor is important for any industry application. Thanks to technological advancement, there are many options available. Sadly, not all of them have sufficient power for different industrial purposes. However, a rotary screw compressor is one of the cost-friendly choices over other options for different industrial applications. But at times, while exploring the compressors, it is quite obvious to wonder how big of an air compressor do I need. For this, there are many factors that have an impact on the overall choice.
Choosing the type of air compressor
The type of tool and its use:
The type of tool that is required in a particular industry is important to decide on the air compression choice. The tool that will be used with the air compressor shall determine the PSI and CFM requirements of the compressor unit. If such tools are used intermittently, then a smaller tank can be chosen. If it is used in a continuous manner for a long span of time, then a large tank is needed.
For those who work in the industry where there is frequent movement from one job site to another, then it is obvious to wonder how big of an air compressor do I Need. In that case, a portable air compressor is important. This compressor comes with a diesel-powered motor. It is not necessary that a user can have access to the electrical power at the job sites. That is why the diesel-powered motor can offer better flexibility to move around. There are industries like energy, construction, and demolition that require such compressor units.
Choosing the size Commercial Air Compressor:
If a specific type of air compressor is chosen and the question of how big of an air compressor do I need still occurs, then it is important to choose the right size too. It is good to measure times since the investment is time-based. It can be decided on factors such as:
Requirements of Air Demand:
Such rating is the crucial one to make the decision on air compressor size. It is important to understand that if there is more horsepower, then it can satisfy better air demand. This way the rating of horsepower is equivalent to a high CFM rating on the compressor.
Cubic Feet per Minute (CFM)
This is the measurement that can accurately tell how much air can be produced in the compressor and move within the system. High CFM is equal to more compressed air at certain power as per every square inch rating. The PSI and CFM rating can be known using air tools and other equipment to give clarity on how much demand of the air will cost to run every equipment piece.
While selecting an industrial air compressor makes sure the right choice of machine is made to meet the needs. The compressor must be efficient and cost-effective. There is also an option like a two-stage compressor that is best for low duty-cycle, but it needs high air demand.