Negosentro.com | For those who are just starting their career in the realm of office cleaning or building service maintenance one of the first things they have to learn about is the difference in a floor scrubber and a floor buffer. This is very important, especially if floor cleaning is part of the job. See also dyson v7 vs v10.
Some believe these are the same machine, but that isn’t the case. Keep reading to learn the difference between a floor scrubber and buffer here. By knowing the difference, a person can make the right decision regarding the machine they need.
The Floor Scrubber
Regardless of if a person opts for a floor scrubber rental or to purchase their own, knowing what it does is important. A floor scrubber is also called an auto scrubber or automatic floor scrubber. Not only do these have a scrubbing head but also an automated system that dispenses the cleaning solution and then sucks it back up.
In one pass over the floor being cleaned, it’s possible to dispense the stripping or cleaning solution, scrub it into the floor’s surface, and vacuum it using an auto scrubber squeegee. While the automatic scrubber is typically more expensive up front, the time a person can save using them will probably set off the initial cost.
The Floor Buffer
The modern floor buffer is also called a rotary floor machine because the scrubbing surface is always rotating in a circle in the same direction. The buffer is designed to spin at varying speeds.
The speed the brush or pad rotates affects the floor cleaning job done. For example, a lower speed buffer is designed to handle ground in dirt that needs some muscle behind it. It’s also the choice needed to strip away old wax from hard surfaces.
Most low-speed buffers rotate at a speed starting at 175 rpm. The variable speed buffers go from 175 rpm to 350 rpm.
High-speed buffers are also available. These are designed for polishing a hard floor surface. They rotate at very high speeds ranging from 1000 rpm to 3000 rpm. With this machine, it’s not possible to do any scrubbing work, but with the right polishing pad, any floor can be brought to an impressive shine.
When buying a floor buffer or scrubber, several power options can determine which one is right. The most common is a direct connection to a power source. However, others have a propane-powered engine or internal batteries that propel the rotating pad.
The advantage offered by the propane-powered engine or internal batteries is that they are free from power cords, which could impact the cleaning or buffing job being done. An advantage of electric machines is a constant power source without having to worry about a drained fuel tank or battery.
Making a Decision
There are several factors to consider when trying to figure out if a floor scrubber or floor buffer is needed. It’s important to think about the work that needs to be done. This will help determine which option is best for the situation.
If a person is in charge of a larger facility with tight spaces and wide open spaces, purchasing both the buffer and scrubber could be best. Consider this carefully to ensure the right option is found. No one wants to take on a cleaning job and not have the right equipment.