A Guide To The Preventative Maintenance You Need To Do On Your Car

Preventative Maintenance

Car maintenance is a vital step for all car owners to increase the life of their motor vehicle, and to make the vehicle look new all the time.  It is important that you develop and follow a car maintenance schedule at all times, and do not ignore or delay the schedule to ensure the car remains at its best performance. Preventative maintenance is the most significant aspect to increase the vehicle’s life, as well as saving money on repairs. Never ignore any preventative maintenance as this can tell you when to change oil, gain inspections, and check tire pressure.  This article will provide information on the preventative maintenance you need to do on your car.

Step #1:  Checking The Air Filter

The majority of car problems are due to a faulty air filter being attached to the vehicle, and the wear caused by the air filter.  This is the reason why you should have the air filters changed at least every twelve months or after 12,000 miles – whichever comes first.  DO NOT ignore this area of maintenance as it can result in problems with the car’s AC and cause you to breathe unhealthy air in the car.

Air filters can be replaced by any mechanic in the comfort of your garage within ten minutes.  It is also possible to change air filters independently; thereby, saving you the effort and money of contacting a mechanic.  

To change air filters, you need to first locate the filter, and this is situated in the hood of the vehicle.  It is a small rectangular box with metal clips inside and can be seen almost immediately after lifting the hood of the car.  If you cannot find it, then check the car’s owner’s manual for assistance.

After locating the filter box, see how the air filter fits inside the box.  It is vital that you take note of the filter directions because you will need to replace the filter in this direction.  After removing the filter, insert the new filter in the same manner, and you will note it touching the edges perfectly. When you are done, close the metal clips and re-insert the box to the vehicle.

Step #2:  Inspecting Tire Pressure And Fluids

It is essential that you inspect your car’s tire pressure and fluids on a regular basis.  Due to the fact that these items are main components in the vehicle, they tend to wear out quickly; therefore, it is important that you keep your eye on them.  

Fluids and tire inspections can be done in ten minutes, and all you need to do is open the engine to detach the oil dipstick.  Clean it thoroughly, and then re-insert it to the engine. When you pull it out again, you will see oil sticking it, and this is when you know it is time to change the oil.

Tire pressure checks can be conducted using a pressure gauge.  The pressure gauge indicates the pressure in each tire, and you need to ensure it remains at a consistent level.  It is recommended that you perform this test every second or third week to avoid wear to the tire.

Step #3:  Checking The Battery

One of the more common problems experienced by car owners is a car battery running out.  Unfortunately, this problem tends to present itself at the most inopportune moment, such as when you are left stranded in the middle of the night on the side of an isolated road.

To avoid dealing with this issue, it is recommended that you do not ignore the low battery sign in your car and have the car battery checked regularly.  When the battery is being checked, it is important that item is checked for mineral build-ups and leakages. The battery can be cleaned using a battery cleaning brush, and this should be done whenever it is required.

Step #4:  Changing The Spark Plugs

If you find that your engine is not operating correctly, then there is a chance that it may be the spark plugs.  If these items are not checked regularly, they can wear easily and will become covered in mineral build-up. It is highly recommended that you have spark plugs checked regularly and replaced if necessary.  The average spark plug can last for approximately 30,000 miles, but you should read your vehicle’s owner’s manual for a more accurate representation.

Step #5:  Have The Tires Balanced And Rotated

The easiest method to prevent any wearing of car tires, and make them last longer, is by having the tires rotated every now and then.  Not all car tires wear at the same rate; therefore, rotating the rear and front tires separately, you will balance the wear and increase their level of durability.  It is important that all the tires are aligned because non-aligned tires can result in you losing control of the vehicle.

Step #6:  Cleaning The Windshield And Replacing The Wipers

A dirty windshield can be a big problem if it is not cleaned frequently because it can obscure visibility and result in accidents.  It is essential that the car driver has a clear and overall view of the road to ensure safe driving. If you do not clean the windshield regularly, the dirt will begin to accumulate, harden, and the quality of glass can deteriorate.

It should also be noted that the rainy season can influence the windshield wiper quality.  It is important to replace the wipers when necessary as damaged wipers can result in damage to the windshield itself.  This can obscure the driver’s view and can result in a need to replace the windshield and wipers.

Step #7:  Ensuring The Operation Of The Cooling System

The hoses that hold the engine cooling fluid can become damaged quickly if the pressure is too high.  The heater hoses face the same issue as they transport the hot coolant to the passenger compartments. One of the best methods to ensure a working cooling system is to have it checked regularly.  This will reduce the need for expensive replacements of the cooling system if it does break.

As can be seen preventative maintenance of the car can be a good long-term investment according to www.car-partsdirect.com.  Using the information above, you can ensure the good health of your car, as well as saving both money and effort.